Viron Dirt Bike Run In Procedure

Every Viron Dirt Bike is brand new and the engine needs to be given the right amount of fuel and two stroke oil and be “RUN IN”.


Why is breaking in, or running in, your motorbike important?
The amount of stress on the engine is important for preparing all those metal to metal contacts for a tough smooth surface that will mean good performance, not using excessive oil. and a long engine life.

Failing to run in the engine could result in the engine seizing and voiding your warranty.


YOU MUST FOLLOW THIS RUN IN PROCEDURE 

START ENGINE AND WARM UP JUST OFF IDLE UNTIL OPERATING  TEMPERATURE IS REACHED.

WHEN ENGINE IS AT OPERATING TEMPERATURE GENTLY AND  SMOOTHLY RIDE BIKE UPTO 1/2 THROTTLE FOR 15 MINUTES.

STOP AND ALLOW ENGINE TO COOL TO ROOM TEMPERATURE.

RESTART ENGINE AND WARM TO OPERATING TEMPERATURE.

RIDE BIKE FOR A FURTHER 15 MINUTES GENTLY AND SMOOTHLY  AT ¾ THROTTLE.

ALLOW ENGINE TO COOL TO ROOM TEMPERATURE AGAIN.

RESTART ENGINE AND WARM TO OPERATING TEMPERATURE.

RIDE GENTLY AND SMOOTHLY UPTO FULL THROTTLE.


Failure to run the engine in WILL void your warranty.

 

 

Recent Posts